EZ4x4 FlipTop
on a pink Bronco
Updated · By Shawna and Dan Potter
The EZ4x4 EZ FlipTop lets you flip the front roof panels of a 6th-gen Bronco hard top open and lock them in place, and its middle panel rack carries the middle panels on the roof instead of in the cargo area. It fits 2021 and newer 4-door hard tops, installs with 3M VHB tape in about an hour (plus a 24-hour cure), and the rack is rated for 200 lbs. We paid $900 for the complete kit on Elphie Rose.

What the FlipTop does
A Bronco hard top comes apart in panels. The two front panels over the driver and passenger come off for open-air driving, and the middle panels above the back seat come off too. The catch is where they go once they're off: usually a padded bag in the back, taking up the cargo area.
The EZ4x4 system answers that two ways. The EZ FlipTop hinges the front panels so they flip back and lock on the roof instead of coming off at all. The middle panel roof rack is a low aluminum rack on the rear of the roof where the middle panels slide in and lock, and it doubles as a small cargo rack the rest of the time.

Specs and fitment
From EZ4x4's product page for the complete 4-door system:
| Spec | EZ4x4 FlipTop + middle panel rack |
|---|---|
| Fits | 2021 and newer Ford Bronco 4-door hard top, including Raptor. Not soft tops. The rack does not fit 2-door models. |
| Mounting | 3M VHB automotive tape and adhesion promoter, no drilling. Optional bolt-down kit included. |
| Install time | About 1 hour, then 24 hours for the adhesive to cure |
| Rack material | Aluminum, textured black powder coat |
| Rack load rating | Up to 200 lbs, evenly distributed |
| Rack size | About 47.65 in wide by 37.57 in long |
| System weight | 38 lbs |
| Height added | About 11 in above the hard top with front and middle panels flipped back |
| Factory parts | Keeps the factory latches, locks and seals; works with the SiriusXM antenna |
| Warranty | Lifetime guarantee against leaking or delaminating, taped or bolted |
| Color | Black by default; EZ4x4 offers color matching to your Bronco's paint code for a fee |
EZ4x4 also sells the FlipTop and the rack separately, and the FlipTop on its own is made for both 2-door and 4-door Broncos. Prices change often with sales, so check the current price before you buy.
On Elphie Rose
Elphie Rose is a 2026 Bronco Outer Banks 4-door with the factory hard top, so she's the exact fit the complete system is built for. She runs the complete FlipTop and middle panel rack kit.
The install
One person built and installed the whole system alone in a couple of hours, under four start to finish. EZ4x4 quotes about an hour to install; our time includes building the rack. It's a one-person job.

Who it's for
Good fit: 4-door hard top owners who take the roof off often and are tired of panels filling the cargo area, or anyone who wants a small rack up top without a full-length roof rack.
Not a fit: soft top Broncos, and 2-door owners who want the rack (the FlipTop alone does fit 2-doors). The 11 inches of added height with everything flipped back is worth checking against your garage door.
Get the FlipTop
Elphie's kit is the EZ4x4 2021 & Up Bronco 4DR EZ FlipTop & Middle Panel Roof Rack Holder System. See the rest of the roof and rear setup in our rack, carrier and utility guide, or every part on the truck in the parts list.
FAQ
Does the EZ4x4 FlipTop need drilling?
No. The standard install uses 3M VHB automotive tape with adhesion promoter. EZ4x4 also includes an optional bolt-down kit for owners who want mechanical fasteners.
Does the EZ4x4 FlipTop fit a 2-door Bronco?
The FlipTop alone is sold for 2-door and 4-door Broncos. The complete system with the middle panel roof rack fits only 2021 and newer 4-door hard top Broncos, including the Raptor.
How long does the EZ4x4 FlipTop take to install?
EZ4x4 says about one hour, plus 24 hours for the adhesive to cure before driving with the panels flipped. Building the rack and installing the complete system on Elphie Rose took one person a couple of hours, under four in total.
Does the EZ4x4 FlipTop leak?
EZ4x4 says the system keeps the factory latches and seals, and backs it with a lifetime guarantee against leaking or delaminating, whether it is taped or bolted down.
How much weight can the EZ4x4 middle panel rack hold?
EZ4x4 rates the aluminum middle panel rack for up to 200 lbs of evenly distributed weight.
Sources
- EZ4x4: 2021 & Up Bronco 4DR EZ FlipTop & Middle Panel Roof Rack Holder System (fitment, mounting, install time, load rating, dimensions, weight, warranty), checked November 16, 2026